Vapor Juice Direct
Browsing:

Author: Kwao

Pitfalls to Avoid When Making Your DIY E-Juice

The way you add your e-juice concentrate to the blend is very important. Not following the proper procedure can ruin the vape juice. With that in mind, in this post, we’ll look at some of the common mistakes that newbies to DIY vape juice make when working with flavor concentrates.

It is easy to erroneously assume that adding a lot of flavoring to your e-juice will make the flavor richer. However, this is not the case. It can actually make your DIY e-liquid un-vapeable as the flavor intensity may become too strong or even muted. You must use a strict calculation to determine the amount of flavoring to put in your e-juice. Generally, you need to ensure that the percentage of flavoring in your DIY vape juice is not more than 10 percent. Instead of putting using too much flavor, you can use other ingredients like ethyl maltol to highten the flavor of your vape juice.

Another common mistake that newbie DIY vape juice makers are prone to is mixing too many e-cigarette liquid flavors. This is never a good idea. I actually recommend making single flavor e-liquids for some time before you try more complex flavors. The fact is that not all flavors go well together, even some that you may expect to! When you see a vape juice on the market that contains different flavors, the mixologists used different techniques to balance the flavors without one becoming overpowering. Always follow a recipe when making your DIY vape juice. Also, use your common sense. Sometimes, doing more is better. You can actually get a richer taste from your e-juice by mixing fewer ingredients.

Many people who get into DIY e-liquids are very creative, and they usually can’t wait to express this creativity. Therefore, they purchase e-juice flavor concentrate wholesale and start creating their own unique e-juice flavors off the jump. This isn’t the best practice. Unless you have spent a lot of time doing research, you are bound to make several expensive mistakes. As indicated in the preceding paragraph, try your hands on some popular recipes that you find online and perfect your ability to make DIY vape liquids before you start working on your own ideas.DIY vape juice makers are usually too eager to taste their creations that they do not allow the vape juice steep. This is bound to end in disappointment. You need to be patient and steep your e-juice. Steeping ensures that all the different ingredients mix harmoniously so you can get the real taste of the e-liquid when you vape it.

If you are looking to buy e-juice flavor concentrates or you want some DIY vape juice recipes, check out the Flavorah online store.


Cosmic Fog Chill’d Tobacco Review

Chill’d Tobacco is a superb vape juice that will appeal to vapers who enjoy tobacco-based blends. This vape juice by Cosmic Fog has the flavors of peppermint and fresh tobacco leaves. Besides these two flavors, you will also get hints of chocolate when you vape Chill’d Tobacco. Unlike many other tobacco-based e-liquids on the market, Chill’d Tobacco does not taste harsh or artificial. In fact, when you vape Chill’d Tobacco, you can taste the freshness of the tobacco leaves and the peppermint. Neither one of these flavors get overpowering when you vape this Cosmic Fog blend. This e-liquid tastes so good that you can vape it all day long. Chill’d Tobacco is the kind of vape juice you can recommend to your friends and family who love tobacco blends.

Chill’d Tobacco is arguably one of the best tobacco-based vape juice on the market. This Cosmic Fog vape juice has a pleasant taste. When you vape this e-juice, it is the taste of the tobacco flavor and its earthy notes that fill the mouth on the inhale. And when you exhale, it is the taste of the cool menthol flavor that comes alive. The menthol flavor is cool and blends nicely with notes of dark chocolate flavor. This vape juice by Cosmic Fog also has a pleasant aftertaste that has a long-lasting effect.

Chill’d Tobacco by Cosmic Fog is produced with high-quality ingredients such as Vegetable Glycerin (VG) and Propylene Glycol (PG). This e-juice comes with 70 percent VG and 30 percent PG. Chill’d Tobacco can be vaped with a rebuildable dripping atomizer (RDA) and also with a sub-ohm tank. Chill’d Tobacco is the kind of e-juice that does not stain your coils quickly. You can vape this e-juice for some time before changing your coils.

Cosmic Fog’s Chill’d Tobacco produced massive clouds of vapor that is consistent with its max VG content. This vape juice is ideal for practicing cloud tricks. And Chill’d Tobacco also contains high-quality nicotine that comes in different concentration levels. You can buy this vape juice with 0mg, 3mg, 6mg, and 12mg of nicotine. Chill’d Tobacco is one of those e-liquids that everyone can vape. You can vape this e-juice even if you don’t enjoy nicotine; you can buy the version of Chill’s Tobacco with the 0mg of nicotine. And the version of this Cosmic Fog vape juice that comes with 12mg of nicotine is ideal for vapers who consume large amounts of nicotine.

Like many other blends by Cosmic Fog, Chill’d Tobacco has excellent packaging. There is a green and black label on the bottle of this e-juice with the Cosmic Fog logo. There is a You can buy a 60ml bottle of Chill’d Tobacco by Cosmic Fog from Smoking Things for $15.99. This vape juice is usually sold for $20.99. Smoking Things is a US-based vape juice shop that sells premium e-liquids at affordable rates. This vaping company offers free shipping for all orders over $49 within the US.


DIY Blends: Making Your E-liquids

The use of vaping has become popular, especially among young people. Vaping, which is dubbed as an alternative to smoking traditional cigarettes, comes in different flavors. Vaping is international, and there are vaping enthusiasts and communities across the world. Although vaping is fun and can help people quit smoking, there is a side to it that turns most people off. Many vaping enthusiasts would agree that the price of e-liquids is high. This is an crucial point to consider; you can burn through a 10ml bottle of your favorite e-liquid in a day, especially if you vape with a sub-ohm tank. The 10ml bottle of e-juice is costly when you buy a premium blend. This point has made a lot of vaping enthusiasts learn to make e-liquids themselves.

You would find it interesting to know that it is straightforward to make your e-liquids. It is also quite cost-effective. The ingredients needed to create your e-juice are readily available for sale. To make an e-liquid, you will need your base liquids, which are Vegetable Glycerin (VG) and Propylene Glycol (PG). You will also need nicotine and e-cig e-liquid flavors concentrate. Besides these, some distilled water, gloves, syringes, kitchen roll, and bottles are required.

Buying the ingredients to make your e-liquid of choice is easy regardless of where you are. You can make your e-liquid in the UK. All you need is to identify the shops in the UK selling these ingredients. Flavorah sells some of the best flavor concentrates on the market.

When you make your e-liquid, you can be sure of its quality, and you know exactly what you put in it. Many experienced vapers say you develop an intimate connection with vaping when you produce your own e-juice. It is essential to know that you will make some mistakes while getting learning to make your e-liquids. Despite the errors, there is no need to be worried. Every mistake is a learning curve that will make you better at the end of the day.

One of the most crucial things to consider when making your e-liquid is the measurements. Putting too much of any ingredient may result in undesirable results. Vapers who have tried making their e-liquids all recommend an e-liquid calculator. This will come in handy as it will keep the calculations of your ratios accurate. The e-liquid calculator works by indicating the kind of mix you need. It is advisable to buy an e-liquid calculator if you intend to make e-liquids yourself.

Making e-liquids yourself is as fun as it is challenging. There are perks of producing your e-liquids to suit your specifications. You can quickly come up with unique recipes, and you do not have to spend your hard-earned money on overpriced premium e-liquids.


Review of Charlie’s Chalk Dust PachaMama Series

Most of you have probably heard about Charlie’s Chalk Dust. They make one of the best pastry and dessert e-liquids on the market today. But even e-liquid makers need a breakaway. To shift from its usual, the company created the Pacha Mama e juice line to showcase its ability to create tropical fruit blends. I think I found these flavors at the right time because the summer season is just around the corner.

There are about eight e-liquids in the Charlie’s Chalk Dust PachaMama e-juice line. However, I’ll be looking at my four favorites in this piece.

Strawberry Guava Jackfruit

As its name implies, this vape juice is a combination of three fruits, namely, strawberry, guava, and jackfruit. It may sound odd, but this is my favorite of all the four e-liquids in Charlie’s Chalk Dust Pacha Mama line. I love how well-balanced and smooth the combination of flavors is. There is no tyranny on any of the flavors here.

To be honest, the flavor that you get on the inhale when vaping this e-juice is my favorite. It gives you a creamy blend of strawberry and guava. These two flavors last through the exhale but is accompanied by the jackfruit. The guava and jackfruit perfectly play their roles to balance the sweetness of the creamy strawberry.

Mango Pitaya Pineapple

Mango Pitaya Pineapple gives you the taste of a juicy pineapple flavor. On the exhale, a sweet mango flavor comes in followed by the pitaya (or dragon fruit) note at the tail end. The flavor of this vape liquid is quite unbelievable. You can taste all three distinct flavors.

Peach Papaya Coconut

If you love peaches, then you will be left speechless as the rich notes of succulent peaches greet you on the inhale when vaping Peach Mango Coconut. While you are enjoying this, subtle tastes of papaya join the show. Notes of the coconut cream play around the background on the exhale. Do not worry if you are not a fan of coconut as the coconut cream is not heavy. It is so faint you will only probably notice it if you really look for it. I can say this is the creamiest of them all the e-liquids in Charlie’s Chalk Dust Pacha Mama line, but it is a very smooth and enjoyable vape.

Apple Strawberry Nectarine

Apple Strawberry Nectarine is the latest addition to the Pacha Mama series. It is a tantalizing combination of fruit flavors that will have you in a vape trance. On the inhale, you can taste the fresh and crisp notes of Fuji apple with the sweet flavor of ripe strawberries. But just when you thought the experience is over, you will be surprised as notes of sour nectarine appear. This e-juice tastes better the more you vape it. It feels like a new flavor always comes in.

You can get a 60ml bottle of any PachaMama e-juice (even those not mentioned in this review) at the Ejuice Deals online vape shop for only $12.99.


Wotofo Prebuilt Clapton Coils Review

In the world of vaping there are many important things to know about the vaping device. Such as, what type of coils to use or what’s the best coil? A vape user could always build their own coils. However, that can be time-consuming and tedious. Then there are prebuilt coils perfect for on the go vapers who can’t sit around and build one. Having prebuilt coils can still give the intense flavor and vapor production a vaper looks for.

On Wotofo website there are 11 variations of coils to choose from, all in a 10 piece tube package. There is a Dual Core Fused Clapton with a rating of 0.28ohm and 0.62ohm, a Quad Core Fused Clapton with a rating of 0.12ohm and 0.26ohm, a Tri Core Fused Clapton, a Fused Clapton, a Juggernaut, a Braided coil, Alien Wires with a rating of 0.3ohm and 0.22ohm, and a Framed Staple Clapton.

This image has an empty alt attribute; its file name is wotofo_prebuilt_coils_1_700x700.jpgA fused Clapton is simply a thin gauge wire wrapped around 2 or more thick cores. Wotofo provides this coil in an n80 or nichrome 80, with a resistance of 0.5ohm. A dual core fused Clapton coil is a thin wire wrapped around two parallel Clapton cores. A fused Clapton helps give a better vaping experience. Wotofo has available, coils with a resistance of 0.28ohm and one with a resistance of .62ohm. The tri core fused Clapton is 3 thin gauge wires wrapped around the core. It is similar to the dual but just has one more core. The resistance of these are 0.17ohm. The quad fused Clapton has a thinner gauge wire wrapped around 4 thicker gauge cores. This is also an n80 with a resistance of 0.12ohm and 0.26ohm. The multiple cores in each of these, give fused Claptons a faster ramp-up time and a better flavor.

The juggernaut coil is one of the most durable and high flavor coil available on the market. It consists of 2 Clapton coils wrapped around a flat wire. This gives it a better surface area for more flavor.

Braided coils are difficult to make for new vape users. Having a prebuilt one makes vaping easy. A braided coil is simply wire that has been braided. Wotofo offers nichrome 80 braided coil with a built-in resistance of 0.24ohm.

Alien wire is something a little different. It is an upgraded version of the Clapton wire. It has been de-cored and wrapped around a multi-strand core. The wire itself looks very different compared to the Clapton wire. Wotofo has prebuilt alien wires with a resistance of 0.3ohm and one with a resistance of 0.22ohm. With such a low ohm these wires are perfect for sub-ohm vaping.

The last type of coil is the framed staple Clapton. This coil is a fusion between a fused coil and the Staple coil. Building one of these is a tedious and tiresome task. It requires stacked ribbons with thin wire. Wotofo has these prebuilt n80 coils with a resistance of 0.33ohm.

Each tube of coils cost $4.99. They come in a black and green tube. On the tube it displays easily what type of coil it contains. The tube also states the resistance and inner core dimensions. There is a warning on the tube as well stating, “Only for experienced vapers.” A very good caution to all.


Orange Cream E-juice by Atomic Dog Vapor Review

Orange Cream is a rich vape juice that will appeal to vapers with sweet tooth cravings. This e-liquid by Atomic Dog Vapor has the flavor of orange popsicle, ice cream and vanilla. These flavors are of premium quality and are well blended. You can taste all three unique flavors without worrying too much about one becoming too much. With this e-liquid, you get a balanced taste that flows easily. Orange Cream is the kind of e-liquid that you can be proud of vaping. The flavors in this e-liquid complement each other excellently. All you have to do is puff and have a great time. You can vape Orange Cream all day long and not get tired of its flavors. The inhale of this e-liquid is just as impressive and engaging as the exhale. Even the aftertaste of this e-liquid is rich and has a long-lasting effect on the taste buds.

Orange Cream by Atomic Dog can be vaped with both a rebuildable dripping atomizer (RDA), and also with a sub-ohm tank. This e-juice contains 70 percent VG and 30 percent PG. This e-juice has a thick texture, and does not stain your coils easily, like other sweet-flavored e-liquids on the market.

Orange Cream also contain high-quality nicotine in different strength levels. This e-juice comes with 0mg, 3mg, 6mg, 12mg, and 24mg of nicotine. This e-juice has a smooth throat hit. When you vape Orange Cream you do not have to worry about any throat discomforts. This Atomic Dog e-juice makes for a pleasant vaping experience.

Orange Cream e-juice is part of the Atomic Dog Vapor collection. This US e-juice company based in the Erie, PA. Atomic Dog Vapor produces high-quality e-liquids on the market using some of the best ingredients. This e-liquid company has a huge collection of e-liquid flavors that range from fruit, pastry, cream, dessert, and others. Atomic Dog Vapor has about 40 different e-liquid flavors in its collection.

Orange Cream by Atomic Dog Vapor has superb packaging that will catch your eye. This e-liquid is sold in different sizes; 10ml, 30ml, and 124ml. You can buy a 30ml bottle of this e-juice for about $8.99 directly from the Atomic Dog Vapor online shop.

When you buy your bottle of Orange Cream from Atomic Dog Vapor, you do not have to worry about your order not arriving on time. Atomic Dog Vapor has fast shipping, and they always answer your questions on time. This vaping company offers free shipping for all orders worth over $70. And Atomic Dog Vapor works with USPS for its shipping.


Best CBD Topicals by CBDFx Review

The cannabis industry is getting bigger every day with new products being introduced to the market every day. There have long been reports of health benefits that the cannabis plant possesses. However, it is only recently that western scientists have begun researching and proving that this plant does have medical benefits. Studies have shown that cannabis has a lot of components called cannabinoids which are more than 100 in number. This cannabinoids all perform different tasks, and not all have been studied yet. Cannabidiol or CBD is one of the most researched cannabinoids in cannabis. Studies have found that CBD is not toxic and also does not have any psychoactive effect on the mind and body. It does, however, have a lot of medicinal benefits that will revolutionize the medical industry and how different diseases are treated.

Studies have shown that CBD can bring relief for a number of diseases. The ability of CBD to reduce the number of seizures caused by epilepsy has been celebrated. This chemical compound has a tremendous effect on people who have epilepsy. The Food and Drug Administration (FDA) in the United States are even in support of this claim. The FDA has approved one CBD-based drug meant for the treatment of seizures triggered by epilepsy. This drug, the first of its kind to be approved in the US is intended for treating children with epilepsy. Now, some groups have begun calling for health authorities to consider making CBD legal for treating pets. However, the position of authorities has not changed. It is illegal at both federal and state level for pets to be treated using CBD oil and other cannabis-derived products. But the laws have not stopped pet owners from trying. The Internet is packed with several reports into how CBD oil has saved the lives of sick pets. But it is essential for pet owners to be cautious of these claims since there have been very limited studies into them.

The few studies that have been carried out into the effect that CBD has pets have been positive and encouraging. However, health authorities are of the opinion that more studies need to be conducted to understand what happens when pets ingest CBD oil fully. CBDFx produces impressive CBD products.

Some owners have said that CBD oil has helped their dogs suffering from chronic pain and inflammation caused by arthritis. CBD can reduce pain and has been shown to increase mobility in pets suffering from arthritis. But it can get tricky since owners are administering CBD oil to their pets without professional advice. As the laws currently stand, vets cannot prescribe and treat sick pets using CBD oil. This lack of medical supervision has led to some fatal cases where pets have become sick after being given CBD. Most dangers come from the dosage and the quality of the CBD oil in question. High-quality CBD topicals are great for pets.

It will be better and much safer for everybody if health authorities change their current position on treating pets with CBD oil.


Vaping 101: How to Build a Coil

If you are using rebuildable atomizers, then you need to know how to build a coil, or you can buy pre-built coils. Buying coils is easy and convenient. However, the cost adds up over time. This is why building your own coil is a much more attractive idea.

It is important to note that building coils are only something that you need to concern yourself with if you are using rebuildable atomizers. Most newbies do not use rebuildables. Therefore, building a coil is something that will most likely be reserved for seasoned vapers. With that said, coil building is quite simple. You do not have to be an experienced vaper to be able to build a coil provided you follow the instructions below step-by-step.

The first step for coil building is getting your supplies. The things you will need include wire, wire cutter, tweezer, screwdriver, or something to roll the wire around, scissors, and cotton (for wicking).

Before you begin making your coil, you need to determine the type of build that your device will support – not only the length of the coil, but also the thickness of the wire. The most common types of coils are Kanthal, Nickel, Stainless Steel, Titanium, Nichrome, and Clapton. Most rebuildable atomizers are compatible with 3mm thick coils. However, for the length of the coil build, you need to assess the size of the build deck and check the manufacturer’s instructions. Once you have that figured out, the next step is to roll your coil around the screwdriver or coiling tool. This should be easy. When you get the desired coil length, you can snip off the edges. You need to measure properly and ensure that you are snipping it off at the right length. Once you have built your coil, you can fix it on your build deck and wick it.

This is the basic procedure for coil building. Apart from this, there are a few things that you need to consider. For example, you need to know the resistance of your coil. To some extent, the resistance of your coil depends on whether it is a micro or macro build. It is important to understand Ohm’s law to appreciate how coil resistance works.

It will take some time to perfect your coil building skills. Don’t be disappointed if you don’t get it on your first try. There are many tools out there that can make building a coil easier.


Here’s What You Need for Your DIY E-Liquid

The vape industry is diverse, and it grows every day. As a result, there are unarguable differences that come up from time to time, between manufacturers and even vapers. There are basically only four ingredients used in making vape juice. If you will be making your own vape juice, it means you will not have too much to work with. Here are the ingredients; Vegetable Glycerin (VG): Vegetable glycerin is one of the ingredients that form the base of an e-juice mixture. If you take a look at your e-juice bottle, you will see that this ingredient is expressed in percentage. Vegetable glycerin is a viscous liquid with a slightly sweet taste. It is even possible to vape just VG. The higher the concentration of VG in an e-juice will determine if that e-juice will be ideal for sub-ohm vaping. Propylene Glycol (PG): Propylene glycol is the second ingredient together with VG that make up the base of an e-juice. It is not as viscous as VG so it carries the flavoring a lot more. PG is federally approved as safe for consumption. Although, PG is not used in high concentrations because a lot of people find that they are allergic to it. Natural and Artificial Flavoring: This is the most interesting part of an e-juice. After all, it is what makes vaping all the more compensating, especially for former smokers. There are a variety of flavors available for consumption, and an array of flavors you can even mix and match to create entirely splendid vape experience. There are many enticing e-liquid flavor concentrates that you can add to your DIY e-liquid blend. Nicotine: Nicotine is the last ingredient in vape juice, although not insignificant. The major consumers of nicotine in e-juice are transitioning smokers who still need the nicotine hit while they vape. Nicotine is a toxic chemical so it is not used in high percentages. Although, you can leave this ingredient out of an e-liquid mixture and still have a great tasting vape juice. After all, many manufacturers make their e-liquid flavors in varying nicotine concentrations ranging down to 0mg. If you are looking to buy high-grade e-juice flavor concentrates for your DIY experiments, check out the Flavorah online store.

Review of Eleaf Tance Pod Kit

Eleaf is one of the trusted brands in the industry, thanks to its collection of high-quality vaping devices. Recently, the company released two pod kits, namely the Eleaf Tance and the Eleaf Tance Max. Both devices are very similar in terms of their design and functionality. However, the Tance is a bit more advanced. In this post, we’ll be looking at the Tance.

The Eleaf Tance vape pod kit is a small and powerful device which gives you a lot of control over your vaping experience. For such a tiny vape kit, it packs a lot of impressive features including a 580mAh battery, a refillable pod, and adjustable airflow, to name a few. To top it all, the device is incredibly easy to use. Even if you’ve never used a vaping device before, you won’t struggle to figure out how the Tance works. It is draw-activated and doesn’t come with any buttons or complicated features. Simply charge the battery, fill the device with e-juice, and you’re good to start vaping.

The Eleaf Tance has a maximum wattage output of 10W and a resistance range of 0.3ohm to 3ohms. As indicated above, the Tance comes with a 580mAh battery which can last you for a few hours depending on how frequent you vape. There is an LED light on the device which serves as the battery life indicator. The light shows green when the battery level is good and red when it needs to be recharged. It takes about 30 minutes to one hour for the Tance to be fully charged. The device comes with overcharging protection as well as short-circuit protection, over-current protection, and over-discharge protection.

The pod of the Eleaf Tance can hold 2ml of e-juice. This is impressive compared to the 0.7ml capacity of Juul pods. What’s more, Tance pods are refillable. You can fill it with any e-liquid of your choice – either freebase nicotine or nic salts. The Tance has an innovative filling port which automatically seals up. Simply turn the pod upside-down, press the tip of your bottle into the refilling port, and fill it. Once you remove your bottle tip, the port closes without any leaking.

The Eleaf Tance pod comes with a 1.2ohm Ni-Cr alloy coil. The coil is not removable, so you need to change the pod once you start picking up a weird taste or if the flavor intensity of your e-juice starts to weaken. The package includes two pods. However, you can get a pack of five replacement pods at http://eleafworld.com for about $14.50 to $17.25.

The Eleaf Tance is draw activated and has a 15-second timeout. There are two airflow holes on either side of the device. Depending on how you fix the pod, the airflow holes are either 1mm or 1.6mm big. Regardless, the airflow of this device is quite restricted. The Tance was designed for mouth-to-lung vaping. It vapes smoothly.

You can get the Tance pod kit at the Eleaf World online store for around $23.19 to $27.60.